Soft yet firm, so it doesn't smush.
Is 19 mm right for your board?
Look at your board from the side. The number that matters is the height of the front edge, the lip nearest you, measured from the desk up. A ruler stood on the desk gets you close enough. A rest should sit 1 to 2 mm under that number, so your hands run onto the keys instead of climbing up to them.
| Your board's front edge | The rest for it |
|---|---|
| About 14 to 16 mm | 13 mm low profile |
| About 17 to 19 mm | In between. Send me the number and I'll tell you which. |
| About 20 to 22 mm | 19 mm. This one. |
| Taller than 22 mm | Taller than I stock. Send me your board first. |
Boards I've measured myself
| Board | Front edge | What fits |
|---|---|---|
| Keychron Q11 | 20 mm | 19 mm. Sits 1 mm under, right where it should. There's a pair cut for its halves. |
| Keychron Q11 Ultra | 27 mm | Not yet. 19 mm sits 8 mm low. |
| Keychron HE | 23 mm | 19 mm sits 4 mm low. Ask me first. |
| Full-height Keychron (Q, V, C) | 22 to 25 mm | Ask me first. |
| NuPhy Air 75 v3 | 29 mm | Not yet. |
I don't stock a taller height yet. Tell me your board and its number, and it goes straight into deciding what I cut next.
Length
The longer stock lengths usually fit 75%, TKL (80%) and full-size boards. The 159 mm and 127 mm lengths work as a mouse rest, or one under each half of a split. Match your board's width, or go a little wider if you like support past the edges.
None of these lengths fit your board?
Almost fits is still settling. Tell me your keyboard and the length you want in millimetres, and I'll cut a rest to that number on my bench in Utah. Same cork, same 13 mm or 19 mm heights, your length.
What you're getting
I milled the first one for myself.
Twenty years at a computer against film deadlines. 100-hour weeks. Six years on a single film, going over every pixel.
I bought wrist rests. The foam ones flattened. I threw one away the day the lights came up in a dark office and I finally saw how flat it had gotten.
I also build furniture. I know what a block of wood feels like under your wrist, and it isn't comfort.
So I milled a piece of cork for my own desk, then kept simplifying it until I stopped noticing it was there. That's the whole product.
I own a Keychron Q11 and a V3, and they need different rests. Tell me yours.
| Feature | Cork | Foam | Wood |
|---|---|---|---|
| Long-lasting | |||
| Ergonomically Soft | |||
| Ergonomically Supportive | |||
| Easy to Clean | |||
| Eco-friendly |
58 reviews, 4.93 average
Not gonna lie, I get sent a lot of desk stuff for Crispy’s Corner and most of it is fine but forgettable. This wrist rest is not that. The cork texture just feels right under my wrists after hours of editing, and it actually matches the wood tones on my setup instead of looking like some random accessory thrown in. Custom sizing meant it fit my keyboard exactly, no weird gaps hanging off the side. The mouse pad holds up the same way: same cork finish, smooth glide, ties the whole desk together. Genuinely impressed with the quality on both.
Shipped fast, item arrived well packaged, was the exact dimensions I requested, and works great! Really elevated my setup as soon as I put it on my desk. Would definitely buy again in the future!
I had ordered a set of low profile wrist rests previously but wanted to get some standard height ones for my other keyboards. I think ordering pairs of the short ones offers way more flexibility so I did that and they work great! In my first review I said the wrist rests could slip around on smooth surfaces, and I am an idiot the seller actually provides adhesive feet to keep them from slipping. I couldn't edit my previous review to correct myself, but they come unadhered which I love because then it's left up to you if you want them or not.
Arrived on time. Feels good on my wrists when typing.
Excellent wrist rest! Thank you!
👍
I love this cork keyboard wristrest! very comfortable and looks so much nicer than the ugly ones you can find at office supply stores.
Very soft yet firm. Great overall
Handsome and comfortable wrist rest. Great natural/non toxic option to replace the rubber one I had been using. Seller answered my questions and was kind enough to make a custom length wrist rest to fit my keyboard.
Extremely pleased with the wrist rest and my interactions with Micah! Super comfy and well made.
Extremely pleased with the wrist rest and my interactions with Micah! Super comfy and well made.
The cork palm rest is comfortable and has a nicely smooth texture beyond my expectation. I'm happy with the purchase.
Great quality exactly what I was looking for.
The firm yet cushioned feel of the cork provides excellent support for my wrists, making long hours of work noticeably more comfortable and smooth. It strikes a great balance, not too soft and not too hard, which helps reduce strain during typing. It also looks clean and natural on the desk. I really hope more people get a chance to use and enjoy this wrist rest.
Nice product! I would order from this shop again
Beautiful and super comfy!! I'm going to order another one for my partner :) I love how it's supportive but not super hard, just right.
Very comfortable and well made
Would buy this item again.
Great quality, exactly as pictured
Some issues with USPS that Micah helped out with! Otherwise, very happy with these guys.
It's very nice! I Love these things.
Not only is it super comfortable to use, but it looks beautiful too! Love that it's sustainable materials.
I love having the matching wrist rest for the keyboard and mouse! I'm glad I found a sustainable product that also looks beautiful. Great response time as well!
quick to answer questions, item shipped quickly. seems high quality and wrist rest is comfortable to use. wrist rest seems high quality so i'm optimistic it lasts for a while! thank you! would buy from this shop again
Specs
| Material | Solid agglomerated Portuguese cork |
|---|---|
| Height | 19 mm (¾") |
| Pieces | 1 |
| Width | 76 mm (3") |
| Length | Pick from the sizes above, or ask for your own |
| Base | Self-adhesive non-skid feet included |
| Finish | Plant-based oil and wax. No mineral oil, no VOCs. Finish contains highly refined almond oil |
| Made in | Utah, USA |
| Lead time | Made to order. Ships within 5 business days |
| Care | Wipe with a damp cloth. Don't submerge it. Care guide |